RT/RTL 2000 DN 50

Water Transfer Pump

USE LIMITS

Contaminated water, sewage with fibres, industrial waste and animal slurry.

DIMENSIONS (main unit)

A = 457 mm
B = 300 mm
C = 220 mm
D = 88 mm
E = 178 mm
F = Ø 2˝ female

DIMENSIONS (coupling device)

A = 80 mma
B = 180 mm
C = ¾ ˝
D = 509 mm
E = Ø 2˝
F = 110 mm
G = 150 mm
H = 410 mm
I = 75 mm
L = 38 mm
M = 140 mm
N = 100 mm
O = 130 mm
P = 246 mm
Q = 140 mm

Water Transfer Pump

DIMENSIONS (main unit)

A = 465 mm
B = 270 mm
C = 110 mm
D = Ø 2˝ BVP female

Water Transfer Pump

DIMENSIONS (coupling device)

A = 50 mm
B = 130 mm
C = ¾˝ mm
D = Ø 2˝ BVP female
E = 85 mm
F = 135 mm
G = 360 mm
H = 520 mm
I = 94 mm
L = 130 mm
M = 130 mm
N = 38 mm

Water Transfer Pump

OPERATION

Continuous - submerged pump for at least 2/3 of its height. Suitable for fixed installation, with rapid coupling device or more portable applications suspended or rested.

CONSTRUCTION

Motor body:

Cast iron EN GJL 200.

Cover:

Cast iron EN GJL 200.

Pump body:

Cast iron EN GJL 200.

Diffuser:

Cast iron EN GJL 200.

Impeller:

Open to shim on AISI 440C stainless steel diffuser.

System of knife

grinder in stainless steel AISI 440C

Motor:

Insulated dry room.

Insulation:

Class F.

Degree of protection:

IP 68.

Bearings:

Long-life self-lubricated rolling.

Mechanical seal pump side:

Carbon / alumina.

Mechanical seal on motor side:

Carbon / alumina.

Tenuta lip seal:

Rubber.

Cable:

10 metres Neoprene H07RN-F.

Cable lock:

Brass cable clamps.

Single-phase version:

Capacitor housed in a special box with a circuit breaker that allows starting even in overload conditions produced by the knife; version with manual start and auto start floating

Discharge diameter:

DN 50.

Starting:

D.O.L.

Other Products From Clayton Engineering