RW 1500 1½ ˝

Water Transfer Pump

USE LIMITS

Waste and sewage waters, sewage treatment plant.

DIMENSIONS (main unit)

A = 365 mm
B = 180 mm
C = 105 mm
D = 55 mm
E = Ø 1˝ Gas

COMPARE PRODUCT RANGE

RW 1500 1½ ˝

TECHNICAL DATA

RW 1508-2M S/A
RW 1508-2T
RW 1512-2M S/A
RW 1512-2T

COMPONENTS

RW 1500 1½ ˝

DIMENSIONS (coupling device)

A = 50 mm
B = 160 mm
C = ¾˝ mm
D = Ø 2˝ BSP mm
E = 440 mm
F = 85 mm
G = 310 mm
H = 38 mm
I = 130 mm
L = 94 mm
M = 155 mm

Water Transfer Pump

OPERATION

Continuous - submerged pump for at least 2/3 of its height. Suitable for fixed installation, with rapid coupling device or more portable applications suspended or rested.

CONSTRUCTION

Motor body:

Cast iron EN GJL 200.

Cover:

Cast iron EN GJL 200.

Pump body:

Cast iron EN GJL 200.

Impeller:

Vortex cast iron EN GJL 200.

Motor:

Insulated dry room.

Insulation:

Class F.

Degree of protection:

IP 68.

Bearings:

Long-life self-lubricated rolling.

Mechanical seal:

Silicon carbide / silicon carbide.

Radial lip seal:

Rubber.

Cable:

10 metres Neoprene H07RN-F.

Cable lock:

Brass cable clamps.

Single-phase version:

Automatic starting with float switch, direct starting without float switch.

Discharge diameter:

1½ ˝ BSP female.

SPECIAL VERSIONS

FUP-BT:

a low-voltage 42 V AC (CEI 107-43).
Borehole particularly suitable for operation in plants where it is necessary to have security against shock.

Single-phase version:

waterproof box including capacitors and switch.

Cable:

Neoprene H07RN-F 5 metres.

Other Products From Clayton Engineering